A toner cartridge (STC) must be set with its color ID label [A] facing out.
If a toner cartridge (STC) is inserted with its label facing into the machine, this will
cause a "Toner Cartridge Setting Error".
Important
• At elevations 1,000 meters (3,280 ft.) above sea level, the toner cartridge packs
may expand due to the difference in air pressure, preventing them from being
installed in their bins.
• After approximately 24 hours, the cartridges should shrink to normal size.
• If the customer cannot wait for the toner cartridges (STCs) to collapse naturally,
the STC Air Release Kit is available as a service part. For more, contact your
technical supervisor.
To Next Page
Loading...
Need help?
General
