Huawei quidway s3526 series User Manual

Command Manual - Network Protocol
Quidway S3500 Series Ethernet Switches Chapter 2 ARP Configuration Commands
Huawei Technologies Proprietary
2-1
Chapter 2 ARP Configuration Commands
2.1 ARP Configuration Commands
2.1.1 arp check enable
Syntax
arp check enable
undo arp check enable
View
System view
Parameter
None
Description
Using arp check enable command, you can enable the checking of ARP entry, that is,
the device does not learn the ARP entry where the MAC address is multicast MAC
address. Using undo arp check enable command, you can disable the checking of
ARP entry, that is, the device learns the ARP entry where the MAC address is multicast
MAC address.
By default, the checking of ARP entry is enabled, that is, the device does not learn the
ARP entry where the MAC address is multicast MAC address.
Example
# Configure that the device learns the ARP entry where the MAC address is multicast
MAC address.
[Quidway] undo arp check enable
2.1.2 arp probe ip
Syntax
arp probe ip ip-address
undo arp probe ip [ ip-address ]
View
VLAN interface view

Huawei quidway s3526 series Specifications

General

Brand	Huawei
Model	quidway s3526 series
Category	Network Router
Language	English