Command Manual - Security
Quidway S3500 Series Ethernet Switches Chapter 4 EAD Configuration Commands
Huawei Technologies Proprietary
4-1
Chapter 4 EAD Configuration Commands
Note:
For the S3500 series, EAD feature is supported on the S3552G, S3552P, S3528G and
S3528P.
4.1 EAD Configuration Commands
4.1.1 session-control-server
Syntax
session-control-server ip-address
undo session-control-server [ ip-address | all ]
View
RADIUS scheme view
Parameter
ip-address: IP address of the security policy server.
all: IP addresses of all security policy servers.
Description
Use the session-control-server command to configure IP address for the security
policy server.
Use the undo session-control-server command to remove the IP address
configuration.
You can configure up to eight different IP addresses (for eight security policy servers) in
a RADIUS scheme. The switch only responds to packets from the authentication server
and security policy server after the user gets online.
Example
# Configure the security policy server with IP address 192.168.0.1.
<Quidway>system-view
System View: return to User View with Ctrl+Z.
[Quidway] radius scheme Quidway
To Next Page
Loading...
