Command Manual - Security
Quidway S3500 Series Ethernet Switches Chapter 3 AAA & RADIUS Protocol Configuration Commands
Huawei Technologies Proprietary
3-5
ucibindex ucib-index: Configures to display the user specified with ucib-index.
user-name user-name : Configures to display a user specifies with user-name.
user-name is the argument specifying the username. It is a character string not
exceeding 80 characters, excluding “/”, “:”, “*”, “?”, “<” and “>”. The @ character can
only be used once in one username. The pure username (the part before @, namely
the user ID) cannot exceed 55 characters.
Description
Using display connection command, you can view the relevant information of all the
supplicants or the specified one(s). The output can help you with the user connection
diagnosis and troubleshooting.
If no parameter is specified, this command displays the related information about all
connected users.
For the related command, see cut connection.
Example
# Display the relevant information of all the users.
<Quidway> display connection
Total 0 connections matched ,0 listed.
3.1.5 display domain
Syntax
display domain [ isp-name ]
View
Any view
Parameter
isp-name: Specifies the ISP domain name, with a character string not exceeding 24
characters. The specified ISP domain shall have been created.
Description
Using display domain command, you can view the configuration of a specified ISP
domain or display the summary information of all ISP domains.
This command is used to output the configuration of a specified ISP domain or display
the summary information of all ISP domains. If an ISP domain is specified, the
configuration information will be displayed exactly the same, concerning the content
and format, as the displayed information of the display domain command. The output
information can help with ISP domain diagnosis and troubleshooting. Note that the
accounting scheme to be displayed should have been created.
To Next Page
Loading...
Need help?
General
