Command Manual - Security
Quidway S3500 Series Ethernet Switches Chapter 1 802.1x Configuration Commands
Huawei Technologies Proprietary
1-10
Example
# Authenticate the supplicant based on the interface number on Ethernet 0/1.
[Quidway] dot1x port-method portbased interface Ethernet 0/1
1.1.9 dot1x quiet-period
Command
dot1x quiet-period
undo dot1x quiet-period
View
System view
Parameter
None
Description
Using dot1x quiet-period command, you can enable the quiet-period timer. Using
undo dot1x quiet-period command, you can disable this timer.
If an 802.1x user has not passed the authentication, the Authenticator will keep quiet for
a while (which is specified by quiet-period timer) before launching the authentication
again. During the quiet period, the Authenticator does not do anything related to 802.1x
authentication.
By default, quiet-period timer is disabled.
For the related commands, see display dot1x , dot1x timer.
Example
# Enable quiet-period timer.
[Quidway] dot1x quiet-period
1.1.10 dot1x re-authenticate
Syntax
dot1x re-authenticate [ interface interface-list ]
undo dot1x re-authenticate [ interface interface-list ]
View
System view/Ethernet port view
To Next Page
Loading...
Need help?
General
