Command Manual - System Management
Quidway S3500 Series Ethernet Switches Chapter 6 RMON Configuration Commands
Huawei Technologies Proprietary
6-2
Field Description
Rising threshold
Rising threshold. When sampling value rises from normal
value to this threshold, rising threshold alarm will be triggered.
Falling threshold
Falling threshold. When sampling value decreases from
normal value to this threshold, falling threshold alarm will be
triggered.
startup The first trigger
risingOrFallingAla
rm
The type of the first alarm: Specifies to alarm when exceeding
the rising threshold or the falling threshold
6.1.2 display rmon event
Syntax
display rmon event [ event-table-entry ]
View
Any view
Parameter
event-table-entry: Entry index of event table.
Description
Using display rmon event command, you can view RMON events.
The display includes event index in event table, owner of the event, description to the
event, action caused by event (log or alarm information), and occurrence time of the
latest event (counted on system initiate/boot time in centiseconds).
For the related commands, see rmon event.
Example
# Show the RMON event.
<Quidway> display rmon event
Event table 1 owned by HUAWEI is VALID.
Description: null.
Will cause log-trap when triggered, last triggered at 0days 00h:02m:27s.
Table 6-2 Output description of the display rmon event command
Field Description
Event table 1 Index 1 in event table
HUAWEI Owner
To Next Page
Loading...
Need help?
General
