Command Manual - Port
Quidway S3500 Series Ethernet Switches Chapter 1 Ethernet Port Configuration Commands
Huawei Technologies Proprietary
1-9
[Quidway] interface ethernet0/1
[Quidway-Ethernet0/1] flow-constrain method shutdown
1.1.9 flow-control
Syntax
flow-control
undo flow-control
View
Ethernet port view
Parameter
None
Description
Using flow-control command, you can enable flow control feature on the Ethernet port
to avoid discarding data packets due to congestion. Using undo flow-control
command, you can disable flow control feature.
By default, flow control on the Ethernet port is disabled.
Example
# Enable flow control on Ethernet0/1.
[Quidway-Ethernet0/1] flow-control
1.1.10 flow-interval
Syntax
flow-interval interval
undo flow-interval
View
Ethernet port view
Parameter
interval: Specifies time interval, ranging from 5 to 300 in seconds. The step is 5. The
default value is 300.
To Next Page
Loading...
Need help?
General
