Huawei quidway s3526 series User Manual

Command Manual - Network Protocol
Quidway S3500 Series Ethernet Switches Chapter 2 ARP Configuration Commands
Huawei Technologies Proprietary
2-11
interface-type, interface-number and interface-name, refer to the Port Command
Manual.
Description
Using reset arp command, you can reset the ARP mapping entries.
For the related command, see arp static, display arp.
Example
# Reset the static ARP entries.
<Quidway> reset arp static
2.2 Gratuitous ARP Configuration Commands
 Note:
This chapter only applies to S3552G, S3552P, S3528G, S3528P, S3552F, S3526E,
S3526E FM, S3526E FS and S3526C in S3500 series switches.
2.2.1 arp send-gratuitous enable
Syntax
arp send-gratuitous enable
undo arp send-gratuitous enable
View
System view
Parameter
None
Description
Use the arp send-gratuitous enable command to enable gratuitous ARP packet
sending, thus checking for the IP address conflict.
Use the undo arp send-gratuitous enable command to disable this function.
By default, the gratuitous ARP packet sending is enabled.
Gratuitous ARP function is to implement the following functions by sending out
gratuitous ARP packets:

Huawei quidway s3526 series Specifications

General

Brand	Huawei
Model	quidway s3526 series
Category	Network Router
Language	English