Command Manual - Security
Quidway S3500 Series Ethernet Switches Chapter 3 AAA & RADIUS Protocol Configuration Commands
Huawei Technologies Proprietary
3-17
Parameter
active: Configures the current ISP domain (ISP domain view)/current user (local user
view) as being in active state, that is, the system allows the users in the domain (ISP
domain view) or the current user (local user view) to request network service.
block: Configures the current ISP domain (ISP domain view)/current user (local user
view) as being in block state, that is, the system does not allow the users in the domain
(ISP domain view) or the current user (local user view) to request network service.
Description
Using state command, you can configure the state of the current ISP domain/ current
user.
By default, after an ISP domain is created, it is in the active state (in ISP domain view).
A local user will be active (in local user view) upon its creation.
In ISP domain view, every ISP can either be in active or block state. If an ISP domain is
configured to be active, the users in it can request for network service, while in block
state, its users cannot request for any network service, which will not affect the users
currently online.
For the related command, see domain.
Example
# Set the current ISP domain huawei163.net to be in the block state. The supplicants in
this domain cannot request for the network service.
[Quidway-isp-huawei163.net] state block
# Set the user huawei1 to be in the block state.
[Quidway-luser-huawei1] state block
3.1.18 vlan-assignment-mode
Syntax
vlan-assignment-mode { integer | string }
View
ISP domain view
Parameter
integer: Specify the dynamic VLAN delivery mode as integer.
string: Specify the dynamic VLAN delivery mode as string.
To Next Page
Loading...
Need help?
General
