Command Manual - System Management
Quidway S3500 Series Ethernet Switches Chapter 6 RMON Configuration Commands
Huawei Technologies Proprietary
6-10
Example
# Add the entry 10 to the event table and marks it as log event.
[Quidway] rmon event 10 log
6.1.9 rmon history
Syntax
rmon history entry-number buckets number interval sampling-interval [ owner
text-string ]
undo rmon history entry-number
View
Ethernet port view
Parameter
entry-number: Number of the entry to be added/deleted, ranging from 1 to 65535.
buckets number: Capacity of the history table corresponding to the control line.
interval sampling-interval: Sampling interval, ranging from 5 to 3600 (measured in
seconds).
owner text-string: Creator of the line. Length of the character string ranges from 1
to127.
Description
Using rmon history command, you can add an entry to the history control table. Using
undo rmon history command, you can cancel an entry from history control table.
Perform this command to sample, set sample parameter (sample time interval) and
storage amounts for a port. RMON will periodically perform data collection and save for
query on this port. Sample information includes utility, error number and total packet
number.
Example
# Delete the entry 15 from the history control table.
[Quidway-Ethernet0/1] undo rmon history 15
6.1.10 rmon prialarm
Syntax
rmon prialarm entry-number alarm-var [ alarm-des ] sampling-timer { delta | absolute
| changeratio } rising-threshold threshold-value1 event-entry1 falling-threshold
threshold-value2 event-entry2 entrytype { forever | cycle cycle-period } [ owner text ]
To Next Page
Loading...
Need help?
General
