Huawei quidway s3526 series User Manual

Command Manual - System Management
Quidway S3500 Series Ethernet Switches Chapter 5 SNMP Configuration Commands
Huawei Technologies Proprietary
5-3
The following table describes the output fields.
Table 5-1 Output description of the display snmp-agent group command
Field Description
groupname SNMP Group name of the user
Security model The security model adopted by SNMP
readview Read-only MIB view name corresponding to that group
writeview Writable MIB view corresponding to that group
notifyview The name of the notify MIB view corresponding to that group
storage-type Storage type
5.1.4 display snmp-agent mib-view
Syntax
display snmp-agent mib-view [ exclude | include | { viewname mib-view } ]
View
Any view
Parameter
exclude: Display the SNMP mib view excluded.
Include: Display the SNMP mib view included.
viewname: Display the SNMP mib view according to the mib view name.
mib-view: Specify the mib view name.
Description
display snmp-agent mib-view command is used to view the MIB view configuration
information of the Ethernet switch.
Example
# Display the information about the currently configured MIB view.
<Quidway> display snmp-agent mib-view
View name:mv MIB Subtree:internet
Storage-type: nonVolatile -included active
View name:test MIB Subtree:internet
Storage-type: nonVolatile -included active

Huawei quidway s3526 series Specifications

General

Brand	Huawei
Model	quidway s3526 series
Category	Network Router
Language	English