Huawei quidway s3526 series

Command Manual - Routing Protocol
Quidway S3500 Series Ethernet Switches Chapter 4 BGP Configuration Commands
Huawei Technologies Proprietary
4-44
[Quidway-bgp] reflector cluster-id 80
4.1.53 refresh bgp
Syntax
refresh bgp { all | peer-address | group group-name } [ import ]
View
User view
Parameter
all: Reset all the connections with BGP.
peer-address: Reset connection with a specified BGP peer.
group-name: Reset connection with a specified BGP peer group.
import: Refresh the routes learned from the peers
Description
Using refresh bgp peer-address command, you can refresh general BGP routes.
When BGP routing policy changes, it is required to re-compute associated route
information. This command can refresh general BGP routes.
Example
# Refresh all BGP routes.
<Quidway>refresh bgp all
4.1.54 reset bgp
Syntax
reset bgp { all | peer-address [ flap-info ] }
View
User view
Parameter
peer-address: Reset connection with a specified BGP peer.
all: Reset all the connections with BGP.
flap-info: Reset the flap-info of a record at this peer address.