Huawei quidway s3526 series User Manual

Command Manual - Network Protocol
Quidway S3500 Series Ethernet Switches Chapter 9 Access Management Configuration Commands
Huawei Technologies Proprietary
9-1
Chapter 9 Access Management Configuration
Commands
9.1 Access Management Configuration Commands
9.1.1 am enable
Syntax
am enable
undo am enable
View
System view
Parameter
None
Description
Using am enable command, you can enable the access management function. Using
undo am enable command, you can disable the function.
By default, Access management function disabled.
When using the access management function, It is recommended to cancel the static
ARP configuration to ensure that the binding of IP address and Ethernet switch take
effect. If you have configured the static ARP for an IP address in the current port IP
address pool from some other port, the system will prompt to cancel the static ARP
setting.
Example
# Enable the access management function.
[Quidway] am enable
9.1.2 am ip-pool
Syntax
am ip-pool address-list
undo am ip-pool { all | address-list }

Huawei quidway s3526 series Specifications

General

Brand	Huawei
Model	quidway s3526 series
Category	Network Router
Language	English