Command Manual - QoS/ACL
Quidway S3500 Series Ethernet Switches Chapter 2 QoS Commands
Huawei Technologies Proprietary
2-17
Field Description
traffic-redirect
Matches: acl std1 rule 0 running
Redirected to: interface
Ethernet0/2
Matches: acl std1 rule 1 running
Redirected to: interface
Ethernet0/2
Indicates the traffic-redirect configuration of
the switch.
“Matches: acl std1 rule 0 running” indicates
the classification rule to the traffic.
“Redirected to: interface Ethernet0/2”
indicates the redirect port for the packets
matching the classification rule.
traffic-statistic
Matches: acl std1 rule 0 running
0 byte
0 packet
Matches: acl std1 rule 1 running
0 byte
0 packet
Indicates the traffic-statistic configuration of
the switch.
“Matches: acl std1 rule 0 running” indicates
the classification rule to the traffic.
“ 0 byte 0 packet” indicates the statistic
information for the packets matching the
classification rule.
mirrored-to
Matches: acl std1 rule 0 running
Mirrored to: Ethernet0/1
Matches: acl std1 rule 1 running
Mirrored to: Ethernet0/1
Indicates the mirroring configuration of the
switch.
“Matches: acl std1 rule 0 running” indicates
the classification rule to the traffic.
“Mirrored to: Ethernet0/1” indicates the monitor
port for the packets matching the classification
rule.
2.2.3 display qos-global mirrored-to
Syntax
display qos-global mirrored-to
View
Any view
Parameter
None
Description
Using display qos-global mirrored-to command, you can view the settings of the
traffic mirror.
This command is used for displaying the settings of traffic mirror. The information
displayed includes the ACL of traffic to be mirrored and the observing port.
For the related command, see mirrored-to.
To Next Page
Loading...
Need help?
General
