Command Manual - QoS/ACL
Quidway S3500 Series Ethernet Switches Chapter 2 QoS Commands
Huawei Technologies Proprietary
2-16
This command is used for displaying the settings of all the QoS parameters, including
priority tag, redirection, traffic statistics and traffic mirror.
Example
# Display the settings of all the QoS parameters.
[Quidway] display qos-global all
traffic-priority
Matches: acl std1 rule 0 running
Priority action: dscp ef
Matches: acl std1 rule 1 running
Priority action: dscp ef
traffic-redirect
Matches: acl std1 rule 0 running
Redirected to: interface Ethernet0/2
Matches: acl std1 rule 1 running
Redirected to: interface Ethernet0/2
traffic-statistic
Matches: acl std1 rule 0 running
0 byte
0 packet
Matches: acl std1 rule 1 running
0 byte
0 packet
mirrored-to
Matches: acl std1 rule 0 running
Mirrored to: Ethernet0/1
Matches: acl std1 rule 1 running
Mirrored to: Ethernet0/1
Table 2-8 the display Information
Field Description
traffic-priority
Matches: acl std1 rule 0 running
Priority action: dscp ef
Matches: acl std1 rule 1 running
Priority action: dscp ef
Indicates the traffic-priority configuration of the
switch.
“Matches: acl std1 rule 0 running” indicates
the classification rule to the traffic.
“Priority action: dscp ef” indicates the action of
resetting the priority of the packets matching
the classification rule.
To Next Page
Loading...
Need help?
General
