Huawei quidway s3526 series User Manual

Command Manual - Multicast
Quidway S3500 Series Ethernet Switches Chapter 5 PIM Configuration Commands
Huawei Technologies Proprietary
5-7
Description
Using display pim neighbor command, you can view the PIM neighbor information.
Example
<Quidway> display pim neighbor
Neighbor’s Address Interface Name Uptime Expires
8.8.8.6 VLAN-interface1 1637 89
Table 5-3 Output description about PIM neighbors
Field Description
Neighbor Address Neighbor address
Interface Interface where the neighbor has been discovered
Uptime Time passed since the multicast group has been discovered
Expires Specifies when the member will be removed from the group
5.1.9 display pim routing-table
Syntax
display pim routing-table [ { { *g [ group-address [ mask { mask-length | mask } ] ] |
**rp [ rp-address [ mask { mask-length | mask } ] ] } | { group-address [ mask
{ mask-length | mask } ] | source-address [ mask { mask-length | mask } ] } * } |
incoming-interface { interface-type interface-number | null } | { dense-mode |
sparse-mode } ] *
View
Any view
Parameter
**rp: (*, *, RP) route entry.
*g: (*, G) route entry.
group-address: Address of the multicast group.
source-address: IP address of the multicast source.
incoming-interface interface-type interface-number: Route entry with the specified
incoming interface.
null: Specifies the incoming interface type as Null.
dense-mode: Specifies the multicast routing protocol as PIM-DM.
sparse-mode: Specifies the multicast routing protocol as PIM-SM.

Huawei quidway s3526 series Specifications

General

Brand	Huawei
Model	quidway s3526 series
Category	Network Router
Language	English