Command Manual - System Management
Quidway S3500 Series Ethernet Switches Chapter 4 System Maintenance Commands
Huawei Technologies Proprietary
4-3
4.1.3 clock timezone
Syntax
clock timezone zone_name { add | minus } HH:MM:SS
undo clock timezone
View
User view
Parameter
zone_name: Name of the time zone, which is a character with the length ranging 1 to
32.
add: The time is adding compared with the UTC.
minus: The time is minus compared with the UTC.
HH:MM:SS: Time (hour/minute/second).
Description
Using clock timezone command, you can set the information of the local time zone.
Using undo clock timezone command, you can restore to the default Universal Time
Coordinated (UTC) time zone.
After the configuration takes effect, the display clock command can be used to check
it. Besides, the time of the log or debug information uses the local time after the
adjustment of the time zone and summer time.
For the related command, see clock summer-time.
Example
# Set the name of the local time zone as Z5 with the time adding 5 hours compared with
the UTC.
<Quidway> clock timezone z5 add 05:00:00
4.1.4 sysname
Syntax
sysname sysname
undo sysname
View
System view
To Next Page
Loading...
Need help?
General
