Command Manual - Security
Quidway S3500 Series Ethernet Switches Chapter 3 AAA & RADIUS Protocol Configuration Commands
Huawei Technologies Proprietary
3-6
For the related commands, see access-limit, domain, radius scheme, state, display
domain.
Example
# Display the summary information of all ISP domains of the system.
<Quidway> display domain
0 Domain = system
State = Active Access-limit = Disable
Vlan-assignment-mode = Integer
Domain User Template:
Idle-cut = Disable
Self-service = Disable
Messenger Time = Disable
Default Domain Name: system
Total 1 domain(s).1 listed.
3.1.6 display local-user
Syntax
display local-user [ domain isp-name | idle-cut { enable | disable } | service-type
{ telnet | ftp | ssh | lan-access } | state { active | block } | user-name user-name | vlan
vlanid ]
View
Any view
Parameter
domain isp-name: Configures to display all the local users in the specified ISP domain.
isp-name specifies the ISP domain name with a character string not exceeding 24
characters. The specified ISP domain shall have been created.
idle-cut: Configures to display the local users according to the state of idle-cut function.
disable means that the user disables the idle-cut function and enable means the user
enables the function. This parameter only takes effect on the users configured as
lan-access type. For other types of users, the display local-user idle-cut enable and
display local-user idle-cut disable commands will not display any information.
service-type: Configures to display local user of a specified type. telnet means that:
the specified user type is telnet. ftp means that: the specified user type is ftp.
lan-access means that the specified user type is lan-access which mainly refers to
Ethernet accessing users, 802.1x supplicants for example. ssh means that: the
specified user type is SSH. (S3526, S3526 FM and S3526 FS switches don’t support
SSH.)
To Next Page
Loading...
Need help?
General
