Huawei quidway s3526 series

Command Manual - Multicast
Quidway S3500 Series Ethernet Switches Chapter 5 PIM Configuration Commands
Huawei Technologies Proprietary
5-4
Description
Using debugging pim dm command, you can enable PIM-DM debugging functions.
Using undo debugging pim dm command, you can disable the debugging functions.
By default, PIM-DM debugging functions are disabled.
Example
# Enable all PIM-DM debugging functions
<Quidway> debugging pim dm all
5.1.5 debugging pim sm
Syntax
debugging pim sm { all | mbr | verbose | mrt | timer | warning | { recv | send }
{ assert | bootstrap | crpadv | jp | reg | regstop } }
undo debugging pim sm { all | mbr | verbose | mrt | timer | warning | { recv | send }
{ assert | bootstrap | crpadv | jp | reg | regstop } }
View
User view
Parameter
mbr: debugging information of PIM-SM multicast border router event.
verbose: debugging detail information of PIM-SM.
mrt: debugging information of PIM-SM multicast routing table.
timer: debugging information of PIM-SM timer.
warning: debugging information of PIM-SM warning message.
recv: debugging information of PIM-SM receiving packets.
send: debugging information of PIM-SM sending packets.
assert | bootstrap | crpadv | jp | reg | regstop: packets type.
Description
Using debugging pim sm command, you can enable PIM-SM debugging functions.
Using undo debugging pim sm command, you can disable the debugging functions.
By default, PIM-SM debugging functions are disabled.
Example
# Enable all PIM-SM debugging functions
<Quidway> debugging pim sm all