Command Manual - Network Protocol
Quidway S3500 Series Ethernet Switches Chapter 6 DHCP Configuration Commands
Huawei Technologies Proprietary
6-23
Parameter
ip-address: IP address of egress gateway. You can configure up to eight IP addresses
separated by spaces in a command.
all: All IP addresses of egress gateways.
Description
Using the gateway-list command, you can configure a list of egress gateways for
DHCP clients by specifying their IP addresses. Using the undo gateway-list command,
you can delete one or all egress gateways for DHCP clients.
By default, no IP address of egress gateway is configured for clients.
If egress gateway list is configured for multiple times, the latest one will replace the
previous one.
Example
# Assign the egress gateway with the IP address 10.110.1.99 to global DHCP address
pool 0.
[Quidway] dhcp server ip-pool 0
[Quidway-dhcp-0] gateway-list 10.110.1.99
6.2.22 nbns-list
Syntax
nbns-list ip-address [ ip-address ]
undo nbns-list { ip-address | all }
View
DHCP address pool view
Parameter
ip-address: IP address of NetBIOS server. You can configure up to eight IP addresses
separated by spaces in a command.
all: IP addresses of all configured the NetBIOS servers.
Description
Using the nbns-list command, you can configure a list of NetBIOS servers in a global
DHCP address pool. Using the undo nbns-list command, you can remove one or all
NetBIOS server addresses from the global address pool.
By default, no NetBIOS server address is configured.
If you configure NetBIOS server list for multiple times, the latest NetBIOS server list will
replace the previous one.
To Next Page
Loading...
Need help?
General
