Huawei quidway s3526 series User Manual

Command Manual - Routing Protocol
Quidway S3500 Series Ethernet Switches Chapter 1 Static Route Configuration Commands
Huawei Technologies Proprietary
1-17
Example
# Configure the next hop of the default route as 129.102.0.2.
[Quidway] ip route-static 0.0.0.0 0.0.0.0 129.102.0.2
1.2.2 ip route-static default-preference
Syntax
ip route-static default-preference default-preference-value
undo ip route-static default-preference
View
System view
Parameter
default-preference-value: The default preference value of static routes, which will be
the preference value of the static route if its preference is not specified when configured.
Its default value is 60.
Description
Using ip route-static default-preference command, you can configure the default
preference value of static routes. Using undo ip route-static default-preference
command, you can restore the default value.
A static route’s preference will be the default-preference-value set by this command if
its preference is not specified when configured by ip route-static command.
For the related commands, see display ip routing-table, ip route-static.
Example
# Configure the default preference of static routes as 120.
[Quidway] ip route-static default-preference 120

Huawei quidway s3526 series Specifications

General

Brand	Huawei
Model	quidway s3526 series
Category	Network Router
Language	English