Command Manual - System Management
Quidway S3500 Series Ethernet Switches Chapter 1 File System Management Commands
Huawei Technologies Proprietary
1-15
Example
# Shut down FTP Server.
[Quidway] undo ftp server
1.3.4 ftp timeout
Syntax
ftp timeout minute
undo ftp timeout
View
System view
Parameter
minute: Connection timeouts (measured in minutes), ranging from 1 to 35791; By
default, the connection timeout time is 30 minutes.
Description
Using ftp timeout command, you can configure connection timeout interval. Using
undo ftp timeout command, you can restore the default connection timeout interval.
After a user logs on to an FTP Server and has established connection, if the connection
is interrupted or cut abnormally by the user, FTP Server will still hold the connection.
The connection timeout can avoid this problem. If the FTP server has no command
interaction with a client for a specific period of time, it considers the connection to be
failed and disconnect to the client.
Example
# Set the connection timeout to 36 minutes.
[Quidway] ftp timeout 36
1.3.5 local-user
Syntax
local-user user-name
undo local-user { user-name | all [ service-type { telnet | ftp | lan-access } ] }
View
System view
To Next Page
Loading...
Need help?
General
