Huawei quidway s3526 series User Manual

Command Manual - Getting Started
Quidway S3500 Series Ethernet Switches Chapter 1 Logging in Switch Commands
Huawei Technologies Proprietary
1-5
1.1.6 display user-interface
Syntax
display user-interface [ type number ] [ number ]
View
Any view
Parameter
type: Specifies the type of a user interface.
number: Specifies the number of a user interface.
Description
Using display user-interface command, you can view the relational information of the
user interface. The displayed information includes user interface type, absolute/relative
index, transmission speed, priority, and authentication methods.
Example
# Display the relational information of user interface 0.
<Quidway> display user-interface 0
Idx Type Tx/Rx Modem Privi Auth
F 0 AUX 0 9600 3 N
+ : Current user-interface is active.
F : Current user-interface is active and work in async mode.
Idx : Absolute index of user-interface.
Type : Type and relative index of user-interface.
Privi: The privilege of user-interface.
Auth : The authentication mode of user-interface.
A: Authenticate use AAA.
N: Current user-interface need not authentication.
P: Authenticate use current UI's password.
Table 1-1 Output description of the display user-interface command
Field Description
+ Current user interface is in use
F Current user interface is in use and work in asynchronous mode
Idx Absolute index of user interface
Type Type and relative index of user interface
Tx/Rx User interface speed

Huawei quidway s3526 series Specifications

General

Brand	Huawei
Model	quidway s3526 series
Category	Network Router
Language	English