Huawei quidway s3526 series User Manual

Command Manual - VLAN
Quidway S3500 Series Ethernet Switches Chapter 1 VLAN Configuration Commands
Huawei Technologies Proprietary
1-3
VLAN (i.e. whether the route interface exists. If it exists, display primary IP address and
mask), VLAN description, and the ports VLAN contains.
If parameter is not specified, information of the VLAN that has been created is
displayed. If the parameter dynamic or static is selected, information of VLAN created
dynamically or statically by the system is displayed.
For the related command, see vlan.
Example
# Display the information about VLAN1.
[Quidway] display vlan 1
VLAN ID: 1
VLAN Type: static
Route interface: not configured
Description: HUAWEI
Tagged Ports: none
Untagged Ports:
Ethernet0/1 Ethernet0/2 Ethernet0/3
1.1.4 interface vlan-interface
Syntax
interface vlan-interface vlan_id
undo interface vlan-interface vlan_id
View
System view
Parameter
vlan_id: ID of VLAN interface, ranging from 1 to 4094.
Description
Using interface vlan-interface command, you can configure VLAN interface or enter
VLAN interface view. Using undo interface vlan-interface command, you can cancel
one VLAN interface.
For the related command, see display interface vlan-interface.
Example
# Enter VLAN-interface 1 view of VLAN interface.
[Quidway] interface vlan-interface 1

Huawei quidway s3526 series Specifications

General

Brand	Huawei
Model	quidway s3526 series
Category	Network Router
Language	English