Command Manual - Getting Started
Quidway S3500 Series Ethernet Switches Chapter 1 Logging in Switch Commands
Huawei Technologies Proprietary
1-10
Please press ENTER
%SHELL: (The initial character “%” is the header contents)
Hello! Welcome
<Quidway>
1.1.11 history-command max-size
Syntax
history-command max-size value
undo history-command max-size
View
User interface view
Parameter
value: Defines the size of the history buffer, ranging from 0 to 256. By default, the size is
10, that is, 10 history commands can be saved.
Description
Using history-command max-size command, you can configure the size of the history
command buffer. Using undo history-command max-size command, you can restore
default size of the history command buffer.
Example
# Set the history buffer to 20, namely saving 20 history commands.
[Quidway-ui-aux0] history-command max-size 20
1.1.12 idle-timeout
Syntax
idle-timeout minutes [ seconds ]
undo idle-timeout
View
User interface view
Parameter
minutes: Specifies the minute, ranging from 0 to 35791.
seconds: Specifies the second, ranging from 0 to 59.
To Next Page
Loading...
