Huawei quidway s3526 series

Command Manual - Port
Quidway S3500 Series Ethernet Switches Chapter 1 Ethernet Port Configuration Commands
Huawei Technologies Proprietary
1-15
Example
# Configure the network cable type of Ethernet port Ethernet0/1 as auto.
[Quidway-Ethernet0/1] mdi auto
1.1.18 port access vlan
Syntax
port access vlan vlan_id
undo port access vlan
View
Ethernet port view
Parameter
vlan_id: VLAN ID defined in IEEE802.1Q, ranging from 2 to 4094.
Description
Using port access vlan command, you can join the access port to a specified VLAN.
Using undo port access vlan command, you can cancel the access port from the
VLAN.
The use condition of this command is the VLAN indicated in vlan_id must exist.
Example
# Join Ethernet0/1 port to VLAN3 (VLAN3 has existed).
[Quidway-Ethernet0/1] port access vlan 3
1.1.19 port hybrid pvid vlan
Syntax
port hybrid pvid vlan vlan_id
undo port hybrid pvid
View
Ethernet port view
Parameter
vlan_id: VLAN ID defined in IEEE802.1Q, ranging from1 to 4094 and the default
vlan_id is 1.