Huawei quidway s3526 series User Manual

Command Manual - Integrated Management
Quidway S3500 Series Ethernet Switches Chapter 2 HGMP V2 Configuration Commands
Huawei Technologies Proprietary
2-22
2.3.10 display cluster candidates
Syntax
display cluster candidates [ mac-address H-H-H | verbose ]
View
Any view
Parameter
mac-address H-H-H: MAC address of candidate device.
verbose: Display the detailed information about the candidate device.
Description
Using display cluster candidates command, you can view candidate devices of the
cluster.
This command can only be performed on the administrator device.
The candidate devices are collected by NTDP. Execute hop command in System view
to specify the collection range.
This command displays the candidate device collected by NTDP last time. In order to
ensure the correctness of display, you can manually perform a collection first, or set the
NTDP to run collection periodically.
Example
# Display all the candidate devices lists.
<Quidway> display cluster candidates
MAC HOP IP PLATFORM
00e0-fc10-0000 1 Quidway S3526
00e0-fc07-3c00 3 Quidway S3526
00e0-fc07-4de0 2 192.169.121.257/25 Quidway S3526
00e0-fc07-0bc0 0 Quidway S3526
# Display the information about the specified candidate device.
<Quidway> display cluster candidates mac-address 00e0-fc61-c4c0
Hostname : LSW1
MAC : 00e0-fc61-c4c0
Hop : 1
IP: 1.5.6.9/16
Platform : Quidway S3526
# Display the detailed information about all the candidate devices.
<Quidway> display cluster candidates verbose
Hostname : Quidway

Huawei quidway s3526 series Specifications

General

Brand	Huawei
Model	quidway s3526 series
Category	Network Router
Language	English