Command Manual - QoS/ACL
Quidway S3500 Series Ethernet Switches Chapter 2 QoS Commands
Huawei Technologies Proprietary
2-28
Description
Using priority trust command, you can configure system trusting the packet 802.1p
priority and not replacing the 802.1p priorities carried by the packets with the port
priority. Using undo priority command, you can configure the system not trust packet
802.1p priority.
By default, the system replaces the 802.1p priority carried by a packet with the port
priority.
For the related command, see priority.
Example
# Configure system trusting the packet 802.1p priority and not replacing the 802.1p
priorities carried by the packets with the port priority.
[Quidway-Ethernet0/1] priority trust
2.2.15 qos cos-local-precedence-map
Syntax
qos cos-local-precedence-map cos0-map-local-prec cos1-map-local-prec
cos2-map-local-prec cos3-map-local-prec cos4-map-local-prec cos5-map-local-prec
cos6-map-local-prec cos7-map-local-prec
undo qos cos-local-precedence-map
View
System view
Parameter
cos0-map-local-prec: Specifies the mapping value of “COS 0->local-prec”, which
ranges from 0 to 7.
cos1-map-local-prec: Specifies the mapping value of “COS 1->local-prec”, which
ranges from 0 to 7.
cos2-map-local-prec: Specifies the mapping value of “COS 2->local-prec”, which
ranges from 0 to 7.
cos3-map-local-prec: Specifies the mapping value of “COS 3->local-prec”, which
ranges from 0 to 7.
cos4-map-local-prec: Specifies the mapping value of “COS 4->local-prec”, which
ranges from 0 to 7.
cos5-map-local-prec: Specifies the mapping value of “COS 5->local-prec”, which
ranges from 0 to 7.
To Next Page
Loading...
Need help?
General
