Huawei quidway s3526 series

Command Manual - QoS/ACL
Quidway S3500 Series Ethernet Switches Chapter 2 QoS Commands
Huawei Technologies Proprietary
2-29
cos6-map-local-prec: Specifies the mapping value of “COS 6->local-prec”, which
ranges from 0 to 7.
cos7-map-local-prec: Specifies the mapping value of “COS 7->local-prec”, which
ranges from 0 to 7.
Description
Using qos cos-local-precedence-map command, you can configure “COS
->Local-precedence” map. Using undo qos cos-local-precedence-map command,
you can restore its default value.
By default, the system provides the default “COS ->Local-precedence” mapping
relationship.
Table 2-16 The default “COS ->Local-precedence” map
COS Value Local Precedence
0 2
1 0
2 1
3 3
4 4
5 5
6 6
7 7
If needed, you can change “COS->Local-precedence” map using the command.
Example
# Configure “COS->Local-precedence” map.
[Quidway] qos cos-local-precedence-map 0 1 2 3 4 5 6 7
After the configuration, the “COS->Local-precedence” map is shown in Table 1-6.
Table 2-17 “COS->Local-precedence” map
COS Value Local Precedence
0 0
1 1
2 2
3 3
4 4