Command Manual - QoS/ACL
Quidway S3500 Series Ethernet Switches Chapter 1 ACL Commands
Huawei Technologies Proprietary
1-14
Monday, Tuesday, Wednesday, Thursday, Friday, Saturday or Sunday;
working-day, representing 5 working days, from Monday to Friday;
off-day, representing Saturday and Sunday;
daily, representing everyday of the week.
from start-time start-date: Start time and date of the special time range, determining
effective days of the time range with the end-date, format as hh:mm MM-DD-YYYY.
to end-time end-date: End time and date of the special time range, determining
effective days of the time range with the start-date, format as hh:mm MM-DD-YYYY.
If the above two parameters are omitted, there is no limit to the effective date.
Description
Using time-range command, you can configure a time range. Using undo time-range
command, you can delete a time range.
If you input the parameter when use the undo time-range command, the system will
delete the corresponding content of the time range according to the parameter input.
Example
# Configure a time range being effective since zero hour on January 1, 2000 and
forever.
[Quidway] time-range test from 0:0 1-1-2000
1.2 ACL Configuration Command List of S3526E and S3526C
1.2.1 acl
Syntax
acl { number acl-number | name acl-name [ advanced | basic | link | user ] }
[ match-order { config | auto } ]
undo acl { number acl-number | name acl-name | all }
View
System view
Parameter
number acl-number: Access list number, ranging from:
2000 to 2999: Basic ACL.
3000 to 3999: Advanced ACL.
4000 to 4999: L2 ACL.
5000 to 5999: User-defined ACL.
To Next Page
Loading...
Need help?
General
