Huawei quidway s3526 series User Manual

Command Manual - Integrated Management
Quidway S3500 Series Ethernet Switches Chapter 2 HGMP V2 Configuration Commands
Huawei Technologies Proprietary
2-20
Example
# Delete the switch from cluster, its member number is 2.
[Huawei_0.Quidway-cluster] delete-member 2
2.3.9 display cluster
Syntax
display cluster
View
Any view
Parameter
None
Description
Using display cluster command, you can view the state and basic configuration
information of the cluster.
This command can be performed on both administrator device and member device, but
the displays are different. In the administrator device, there are cluster name, member
number, handshake interval, holdtime, address pool, and the server of cluster. In the
member device, there are member number, MAC address of administrator device, and
the state of administrator device.
Example
# Display information about cluster on the administrator device.
<Quidway> display cluster
Cluster name:"sss"
Role:Administrator
Handshake timer:10 sec
Handshake hold-time:60 sec
IP-Pool:1.1.1.1/20
No logging host configured
No SNMP host configured
No FTP server configured
No TFTP server configured.

Huawei quidway s3526 series Specifications

General

Brand	Huawei
Model	quidway s3526 series
Category	Network Router
Language	English