Huawei quidway s3526 series User Manual

Command Manual - Routing Protocol
Quidway S3500 Series Ethernet Switches Chapter 3 OSPF Configuration Commands
Huawei Technologies Proprietary
3-22
Address Type Refcount Intf Addr Intf Name
---------------------------------------------------------------------
202.38.160.1 Direct 3 202.38.160.1 Vlan-interface2
202.38.160.2 Neighbor 1 202.38.160.1 Vlan-interface2
Table 3-9 Description of information generated by the command display ospf
nexthop
Field Description
Address Address of next hop
Type Type of next hop
Refcount
Reference count of the next hop, i.g., number of routes using the
next hop
Intf Addr IP address of the interface to the next hop
Intf Name The interface to the next hop
3.1.21 display ospf peer
Syntax
display ospf peer [ brief ]
View
Any view
Parameter
None
Description
Using display ospf peer command, you can view the information about OSPF peer.
Using display ospf peer brief command, you can view the brief information of every
peer in OSPF, mainly the peer number at all states in every area.
Example
# View the information of OSPF peer.
<Quidway> display ospf peer
Area 0.0.0.0 interface 10.153.17.88(Vlan-interface1)'s neighbor(s)
RouterID: 2.2.2.2 Address: 10.153.17.89
State: Full Mode: Nbr is Master Priority: 1
DR: 10.153.17.89 BDR: 10.153.17.88
Dead timer expires in 31s

Huawei quidway s3526 series Specifications

General

Brand	Huawei
Model	quidway s3526 series
Category	Network Router
Language	English