Huawei quidway s3526 series User Manual

Command Manual - Routing Protocol
Quidway S3500 Series Ethernet Switches Chapter 3 OSPF Configuration Commands
Huawei Technologies Proprietary
3-18
3.1.18 display ospf interface
Syntax
display ospf interface [ interface-type interface-number ]
View
Any view
Parameter
interface-type interface-number: Specify an interface.
Description
Using display ospf interface command, you can view the OSPF interface information.
Example
# Display the OSPF interface information of Vlan-interface1.
<Quidway> display ospf interface vlan-interface 1
Interface: 10.110.10.2 (Vlan-interface1)
Cost: 1 State: BackupDR Type: Broadcast
Priority: 1
Designated Router: 10.110.10.1
Backup Designated Router: 10.110.10.2
Timers: Hello 10, Dead 40, Poll 0, Retransmit 5, Transmit Delay 1
Table 3-6 Description of information generated by the command display ospf
interface
Field Description
Cost Cost of the interface
State State of the interface state machine
Type Network type of OSPF
Priority Priority of DR for interface election
Designated Router DR on the network in which the interface resides
Backup Designated Router BDR on the network in which the interface resides
OSPF timers, defining as follows:
Hello Interval of hello packet
Dead Interval of dead neighbors
Poll Interval of poll
Timers
Retransmit Interval of retransmitting LSA

Huawei quidway s3526 series Specifications

General

Brand	Huawei
Model	quidway s3526 series
Category	Network Router
Language	English