Command Manual - Routing Protocol
Quidway S3500 Series Ethernet Switches Chapter 3 OSPF Configuration Commands
Huawei Technologies Proprietary
3-17
Field Description
HELLO: hello timer mismatch Interval of HELLO packet is mismatched
HELLO: dead timer mismatch Interval of dead neighbor packet is mismatched
HELLO: extern option
mismatch
Extern option of Hello packet is mismatched
HELLO: router id confusion Hello packet: Router ID confusion
HELLO: virtual neighbor
unknown
Hello packet: unknown virtual neighbor
HELLO: NBMA neighbor
unknown
Hello packet: unknown NBMA neighbor
DD: neighbor state low
Database description (DD) packet: asynchronous
neighbor state
DD: unknown LSA type DD packet: unknown LSA type
LS ACK: neighbor state low
Link state acknowledgment (LS ACK) packet:
asynchronous neighbor state
LS ACK: wrong ack Link state acknowledgment packet: ack error
LS ACK: duplicate ack
Link state acknowledgment packet: ack
duplication
LS ACK: unknown LSA type
Link state acknowledgment packet: unknown LSA
type
LS REQ: neighbor state low Link state request (LS REQ) packet
LS REQ: empty request Link state request packet: empty request
LS REQ: wrong request Link state request packet: erroneous request
LS UPD: neighbor state low
Link state update packet: asynchronous neighbor
state
LS UPD: newer self-generate
LSA
Link state update packet: newer LSA generated by
itself
LS UPD: LSA checksum bad Link state update packet: LSA checksum error
LS UPD:received less recent
LSA
Link state update packet: received less recent LSA
LS UPD: unknown LSA type Link state update packet: unknown LSA type
OSPF routing: next hop not
exist
Next hop of OSPF routing does not exist
DD: MTU option mismatch MTU option of DD packet is mismatched
To Next Page
Loading...
Need help?
General
