Command Manual - Security
Quidway S3500 Series Ethernet Switches Chapter 3 AAA & RADIUS Protocol Configuration Commands
Huawei Technologies Proprietary
3-20
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] radius scheme CAMS
[Quidway-radius-CAMS] accounting-on enable
3.2.2 accounting optional
Syntax
accounting optional
undo accounting optional
View
RADIUS scheme view
Parameter
None
Description
Using the accounting optional command, you can enable the selection of RADIUS
accounting option. Using the undo accounting optional command, you can disable
the selection of RADIUS accounting option.
By default, selection of RADIUS accounting option is disabled.
If no RADIUS server is available or if RADIUS accounting server fails when the
accounting optional is configured, the user can still use the network resource,
otherwise, the user will be disconnected.
The user configured with accounting optional command in RADIUS scheme will no
longer send real-time accounting update packet or stop accounting packet.
Example
# Enable the selection of RADIUS accounting of the RADIUS scheme named as
CAMS.
[Quidway-radius-cams] accounting optional
3.2.3 data-flow-format
Syntax
data-flow-format data { byte | giga-byte | kilo-byte | mega-byte } packet
{ giga-packet | kilo-packet | mega-packet | one-packet }
undo data-flow-format
To Next Page
Loading...
Need help?
General
