Command Manual - Network Protocol
Quidway S3500 Series Ethernet Switches Chapter 2 ARP Configuration Commands
Huawei Technologies Proprietary
2-2
Parameter
ip-address: IP address requiring ARP timed probing.
Description
Using arp probe ip command, you can configure the IP address requiring ARP timed
probing. Using undo arp probe ip command, you can delete the IP address requiring
ARP timed probing.
By default, IP address requiring ARP timed probing is null.
In S3500 Series Ethernet Switches, only S3526, S3526 FM, S3526 FS supports this
command.
For the related command, see display arp probe.
Example
# Configure the IP address 202.38.10.2 requiring ARP timed probing on VLAN interface
1.
[Quidway-Vlan-interface1] arp probe ip 202.38.10.2
2.1.3 arp source-suppression cache
Syntax
arp source-suppression cache cache-value
undo arp source-suppression cache
View
System view
Parameter
cache-value: the number of source IP addresses to be suppressed, ranging from 2 to
1024. The default value is 16.
Description
Using arp source-suppression cache command, you can configure the number of
source IP addresses to be suppressed. Using undo arp source-suppression cache
command, you can restore the number of source IP addresses to default.
For the related command, see display arp source-suppression.
In S3500 Series Ethernet Switches, only S3552G, S3552P, S3528G, S3528P and
S3552F supports this command.
Example
# Configure the number of source IP addresses to be suppressed is 10.
To Next Page
Loading...
Need help?
General
