Command Manual - Security
Quidway S3500 Series Ethernet Switches Chapter 1 802.1x Configuration Commands
Huawei Technologies Proprietary
1-2
Example
# Display the configuration information of 802.1x. ( Take the S3552G as an example. )
<Quidway> display dot1x
Equipment 802.1X protocol is disabled
CHAP authentication is enabled
DHCP-launch is disabled
Proxy trap checker is disabled
Proxy logoff checker is disabled
Configure: Transmit Period 000030 s, Commit Period 000015 s
ReAuth Period 003600 s
Quiet Period 000060 s, Value of Quiet Period Timer is disabled
Supp Timeout 000030 s, Value of Server Timeout 000100 s
The maximal retransmitting times 000003
Handshake period 000015 s
Total maximum on-line user number is 1024
Total current on-line user number is 0
Ethernet0/1 is link-down
802.1X protocol is disabled
Proxy trap checker is disabled
Proxy logoff checker is disabled
Version-Check is disabled
The port is a(n) authenticator
Authenticate Mode is auto
Port Control Type is Mac-based
ReAuthenticate is disabled
Max on-line user number is 256
… (Omitted)
1.1.2 dot1x
Syntax
dot1x [ interface interface-list ]
undo dot1x [ interface interface-list ]
View
System view/Ethernet port view
To Next Page
Loading...
Need help?
General
