Command Manual - System Management
Quidway S3500 Series Ethernet Switches Chapter 4 System Maintenance Commands
Huawei Technologies Proprietary
4-2
View
User view
Parameter
zone_name: Name of the summer time, which is a character with the length ranging 1
to 32.
one-off: Only set the summer time of a certain year.
repeating: Set the summer time of every year starting from a certain year.
start-time: Set start time of the summer time, input like HH:MM:SS
(hour/minute/second).
start-date: Set start time of the summer time, input like YYYY/MM/DD
(year/month/day).
end-time: Set end time of the summer time, input like HH:MM:SS
(hour/minute/second).
end-date: Set end time of the summer time, input like YYYY/MM/DD (year/month/day).
offset-time: Set offset time of the summer time, input like HH:MM:SS
(hour/minute/second).
Description
Using clock summer-time command, you can set the name, starting and ending time
of the summer time. Using undo clock summer-time command, you can remove the
configuration of the summer time.
After the configuration takes effect, the display clock command can be used to check
it. Besides, the time of the log or debug information uses the local time after the
adjustment of the time zone and summer time.
For the related command, see clock timezone.
Example
# Set the summer time for z2 that starts at 06:00:00 on 08/06/2002 and ends at
06:00:00 on 01/09/2002 with the time adding 1 hour.
<Quidway> clock summer-time z2 one-off 06:00:00 2002/06/08 06:00:00 2002/09/01
01:00:00
# Set the summer time for z2 that starts at 06:00:00 on 08/06 and ends at 06:00:00 on
01/09 in each year from 2002 on with the time adding 1 hour.
<Quidway> clock summer-time z2 repeating 06:00:00 2002/06/08 06:00:00
2002/09/01 01:00:00
To Next Page
Loading...
Need help?
General
