Huawei quidway s3526 series User Manual

Command Manual - Multicast
Quidway S3500 Series Ethernet Switches Chapter 5 PIM Configuration Commands
Huawei Technologies Proprietary
5-10
Example
# Enable multicast and enter the PIM view.
<Quidway> system-view
[Quidway] multicast routing-enable
[Quidway] pim
[Quidway-pim]
5.1.12 pim bsr-boundary
Syntax
pim bsr-boundary
undo pim bsr-boundary
View
Interface view
Parameter
None
Description
Using pim bsr-boundary command, you can configure an interface to be the PIM
domain border. Using undo pim bsr-boundary command, you can remove the border.
You can use this command to set border of bootstraps messages, that is to say,
bootstrap messages cannot pass interfaces that are configured with pim
bsr-boundary command while other PIM messages can. In this way, the network is
divided into different BSR domains.
By default, no domain border is set.
For the related command, see c-bsr.
Example
# Configure domain border on VLAN-interface10.
[Quidway-Vlan-interface10] pim bsr-boundary
5.1.13 pim dm
Syntax
pim dm
undo pim dm

Huawei quidway s3526 series Specifications

General

Brand	Huawei
Model	quidway s3526 series
Category	Network Router
Language	English