Command Manual - Multicast
Quidway S3500 Series Ethernet Switches Chapter 5 PIM Configuration Commands
Huawei Technologies Proprietary
5-3
Parameter
all: all the common debugging information of PIM.
event: debugging information of common PIM event.
packet: debugging information of PIM hello packet.
timer: debugging information of common PIM timer.
Description
Using debugging pim common command, you can enable common PIM debugging
functions. Using undo debugging pim common command, you can disable the
debugging functions.
By default, common PIM debugging functions are disabled.
Example
# Enable all common PIM debugging functions
<Quidway> debugging pim common all
5.1.4 debugging pim dm
Syntax
debugging pim dm { alert | all | mrt | timer | warning | { recv | send } { all | assert |
graft | graft-ack | join | prune } }
undo debugging pim dm { alert | all | mrt | timer | warning | { recv | send } { all |
assert | graft | graft-ack | join | prune } }
View
User view
Parameter
all: all the debugging information of PIM-DM
alert: Interoperation event debugging information of PIM-DM..
mrt: debugging information of PIM-DM multicast routing table.
timer: debugging information of PIM-DM timer.
warning: debugging information of PIM-DM warning message.
recv: debugging information of PIM-DM receiving packets.
send: debugging information of PIM-DM sending packets.
assert | graft | graft-ack | join | prune: packets type.
To Next Page
Loading...
Need help?
General
