Huawei quidway s3526 series User Manual

Command Manual - QoS/ACL
Quidway S3500 Series Ethernet Switches Chapter 3 Logon user’s ACL control commands
Huawei Technologies Proprietary
3-1
Chapter 3 Logon user’s ACL control commands
3.1 Logon user’s ACL control commands
3.1.1 acl
Syntax
acl acl-number { inbound | outbound }
View
User-interface view
Parameter
acl-number: Specifies a basic ACL with a number in the range of 2000 to 2999.
inbound: Perform ACL control over the users that telnet to the local switch.
outbound: Perform ACL control over the users that telnet to other switches from the
local switch.
Description
Using acl command, you can call an ACL and perform ACL control over the TELNET
users.
This command calls numbered basic ACL only.
Example
# Performs ACL control over the users that telnet to the local switch. (Suppose ACL
2020 has been defined.)
[Quidway] user-interface vty 0 4
[Quidway-user-interface-vty0-4] acl 2020 inbound
3.1.2 ip http acl
Syntax
ip http acl acl-number
undo ip http acl
View
System view

Huawei quidway s3526 series Specifications

General

Brand	Huawei
Model	quidway s3526 series
Category	Network Router
Language	English