Command Manual - QoS/ACL
Quidway S3500 Series Ethernet Switches Chapter 2 QoS Commands
Huawei Technologies Proprietary
2-38
2.3.2 display qos conform-level
Syntax
display qos conform-level [ conform-level-value ] { dscp-policed-service-map
[ dscp-list ] | local-precedence-cos-map }
View
Any view
Parameter
conform-level-value: Conform level, in the range of 0~2.
dscp-policed-service-map [ dscp-list ]: Displays “DSCP + Conform-level → Service
group” mapping table. dscp-list: DSCP value, in the range of 0~63. You can input a
single value or a value range, for example, “46” or “0 8 10 16”, in which blank space
must be inserted between values. If you input nothing for it, the whole mapping table
will be displayed.
local-precedence-cos-map: Displays “Local-precedence + Conform-level → 802.1p
priority” mapping table.
Description
Using the display qos conform-level command, you can view “DSCP +
Conform-level → Service group” and “Local-precedence + Conform-level → 802.1p
priority” mapping tables.
Example
# Display “DSCP + Conform-level → Service group” mapping table.
<Quidway> display qos conform-level 0 dscp-policed-service-map
Conform-level 0 :
Dscp-policed-service Map :
dscp : dscp exp cos local-precedence drop-precedence
--------------------------------------------------------------------------
---------
0 : 0 0 0 0 0
8 : 8 1 1 1 0
10 : 10 1 1 1 0
16 : 16 2 2 2 0
18 : 18 2 2 2 0
24 : 24 3 3 3 0
26 : 26 3 3 3 0
32 : 32 4 4 4 0
34 : 34 4 4 4 0
To Next Page
Loading...
Need help?
General
