Command Manual - System Management
Quidway S3500 Series Ethernet Switches Chapter 1 File System Management Commands
Huawei Technologies Proprietary
1-16
Parameter
user-name: Specifies a local username with a character string not exceeding 32
characters, excluding “/”, “:”, “*”, “?”, “<” and “>”. The @ character can only be used
once in one username. The pure username (the part before @, namely the user ID)
cannot exceed 24 characters.
service-type: Specifies the service type. telnet means that: the specified user type is
telnet. ftp means that: the specified user type is ftp. lan-access means that the
specified user type is lan-access which mainly refers to Ethernet accessing users,
802.1x supplicants for example.
all: All the users.
Description
Using local-user command, you can configure a local user and enter the local user
view. Using undo local-user command, you can cancel a specified local user.
By default, no local user.
For the related commands, see display local-user, server-type.
Example
# Add a local user named huawei1.
[Quidway] local-user huawei1
[Quidway-user-huawei1]
1.3.6 password
Syntax
password { simple | cipher } password
undo password
View
Local user view
Parameter
simple: Specifies to display passwords in simple text.
cipher: Specifies to display passwords in cipher text.
password: Defines a password, which is a character string of up to 16 characters if it is
in simple text and of up to 24 characters if it is in cipher text.
To Next Page
Loading...
