Command Manual - Network Protocol
Quidway S3500 Series Ethernet Switches Chapter 6 DHCP Configuration Commands
Huawei Technologies Proprietary
6-9
dhcp server nbns-list ip-address [ ip-address ] { interface vlan-interface vlan_id [ to
vlan-interface vlan_id ] | all }
undo dhcp server nbns-list { ip-address | all } { interface vlan-interface vlan_id [ to
vlan-interface vlan_id ] | all }
View
VLAN interface view, system view
Parameter
ip-address: IP address of NetBIOS server. You can configure up to eight IP addresses
separated by spaces in a command.
interface vlan-interface vlan_id [ to vlan-interface vlan_id ]: Specifies VLAN
interfaces.
all: All VLAN interfaces or IP addresses.
Description
Using the dhcp server nbns-list command, you can define a list of NetBIOS server
addresses in one or multiple VLAN interface DHCP address pools. Using the dhcp
server nbns-list command, you can remove one or all NetBIOS server addresses from
the VLAN interface DHCP address pool(s).
By default, no NetBIOS server address is configured.
If you configure NetBIOS server list for multiple times, the latest NetBIOS server list will
replace the previous one.
For the related commands, see nbns-list and dhcp server netbios-type.
Example
# Assign the NetBIOS server with the IP address 10.12.1.99 to the DHCP address pool
on VLAN interface 1.
[Quidway] interface vlan-interface 1
[Quidway-Vlan-interface1] dhcp server nbns-list 10.12.1.99
6.2.8 dhcp server netbios-type
Syntax
Following is the command for configuring in VLAN interface view the NetBIOS node
type of the clients using the DHCP address pool on the current VLAN interface:
dhcp server netbios-type { b-node | h-node | m-node | p-node }
undo dhcp server netbios-type
Following is the command for configuring in system view the NetBIOS node type of the
clients using the DHCP address pools on multiple VLAN interfaces:
To Next Page
Loading...
Need help?
General
