Command Manual - QoS/ACL
Quidway S3500 Series Ethernet Switches Chapter 2 QoS Commands
Huawei Technologies Proprietary
2-71
2.3.34 wred
Syntax
wred wred-index
undo wred wred-index
View
System view
Parameter
wred-index: WRED index, in the range of 0~3.
Description
Using the wred command, you can create a WRED index view and enter it. Using the
undo wred command, you can restore default setting.
By default, the switch provides four sets of WRED parameters, respectively numbered
as 0~3. The WRED parameters include green-min-threshold, green-max-threshold,
green-max-prob, yellow-min-threshold, yellow-max-threshold, yellow-max-prob,
red-min-threshold, red-max-threshold, red-max-prob and exponent. See the QoS/ACL
module in Operation Manual for more information about red, yellow and green packets.
Example
# Create and enter WRED 0 view.
[Quidway] wred 0
[Quidway-wred-0]
To Next Page
Loading...
