Command Manual - System Management
Quidway S3500 Series Ethernet Switches Chapter 1 File System Management Commands
Huawei Technologies Proprietary
1-31
Parameter
//A.A.A.A/xxx.yyy: Information about the file to be downloaded from the TFTP server.
A.A.A.A: IP address of the TFTP server.
mmm.nnn: Specify the filename saved as after downloaded to the switch, which can be
different from xxx.yyy.
Description
Using tftp get command, you can download a file xxx.yyy from the specified directory
of the TFTP server (at A.A.A.A) and saving it as mmm.nnn on the switch.
For the related commands, see tftp, tftp put.
Example
# Download the file LANSwitch.app from the TFTP server at 1.1.3.214 and save it as
vxWorks.app on the local switch.
[Quidway] tftp binary
[Quidway] tftp get //1.1.3.214/ LANSwitch.app vxWorks.app
1.5.3 tftp put
Syntax
tftp put mmm.nnn //A.A.A.A/xxx.yyy
View
System view
Parameter
mmm.nnn: The file to be uploaded.
//A.A.A.A/xxx.yyy: IP address of the TFTP server and the filename to be saved as.
Description
Using tftp put command, you can upload a file from the switch to the specified directory
on the TFTP server (at A.A.A.A) and saving it as mmm.nnn.
For the related commands, see tftp, tftp get.
Example
# Upload the vrpcfg.txt to the TFTP server at 1.1.3.214 and save it as Temp.txt.
[Quidway] tftp ascii
[Quidway] tftp put vrpcfg.txt //1.1.3.214/temp.txt
To Next Page
Loading...
Need help?
General
