Huawei quidway s3526 series

Command Manual - Security
Quidway S3500 Series Ethernet Switches Chapter 3 AAA & RADIUS Protocol Configuration Commands
Huawei Technologies Proprietary
3-16
service-type { ftp [ ftp-directory directory ] | lan-access | { ssh | telnet }* [ level
level ] }
undo service-type { ftp [ ftp-directory ] | lan-access | { ssh | telnet }* [ level level ] }
For S3526, S3526 FM and S3526 FS:
service-type { ftp [ ftp-directory directory ] | lan-access | telnet [ level level ] }
undo service-type { ftp [ ftp-directory ] | lan-access | telnet [ level level ] }
View
Local user view
Parameter
telnet: Specifies user type as Telnet.
ssh: Specifies user type as SSH.
level level: Specifies the level of Telnet or SSH users. The argument level is an integer
in the range of 0 to 3 and defaults to 1.
ftp: Specifies user type as ftp.
ftp-directory directory: Specifies the directory of ftp users, directory is a character
string of up to 64 characters.
lan-access: Specifies user type to lan-access, which mainly refers to Ethernet
accessing users, 802.1x supplicants for example.
Description
Using service-type command, you can configure a service type for a particular user.
Using undo service-type command, you can cancel the specified service type for the
user.
Example
# Set to provide the lan-access service for the user huawei1.
[Quidway-luser-huawei1] service-type lan-access
3.1.17 state
Syntax
state { active | block }
View
ISP domain view/Local user view