Command Manual - Network Protocol
Quidway S3500 Series Ethernet Switches Chapter 6 DHCP Configuration Commands
Huawei Technologies Proprietary
6-15
Field Description
Type
Address binding type
6.2.14 display dhcp server free-ip
Syntax
display dhcp server free-ip
View
Any view
Parameter
None
Description
Using the display dhcp server free-ip command, you can view the ranges of available
addresses in DHCP address pools, that is, information of unallocated IP addresses.
Example
# Display ranges of the available addresses in DHCP address pools.
<Quidway> display dhcp server free-ip
IP Range from 1.0.0.0 to 2.2.2.1
IP Range from 2.2.2.3 to 2.255.255.255
IP Range from 4.0.0.0 to 4.255.255.255
IP Range from 5.5.5.0 to 5.5.5.0
IP Range from 5.5.5.2 to 5.5.5.255
6.2.15 display dhcp server ip-in-use
Syntax
display dhcp server ip-in-use { ip ip-address | pool [ pool-name ] | interface
[ vlan-interface vlan_id ] | all }
View
Any view
Parameter
ip ip-address: Specifies an IP address.
pool [ pool-name ]: Name of a global address pool. If no address pool is specified, all
the global address pools apply.