Command Manual - Multicast
Quidway S3500 Series Ethernet Switches Chapter 4 IGMP Configuration Commands
Huawei Technologies Proprietary
4-3
Parameter
interface-type interface-number: Interface type and interface number of the router,
used to specify the interface. If the parameters are omitted, information about all the
interfaces running IGMP will be displayed.
Description
Using display igmp interface command, you can view the IGMP configuration and
running information on an interface.
Example
# View the IGMP configuration and running information of all interfaces.
<Quidway> display igmp interface
VLAN-interface1:
IGMP is enabled on interface
Current IGMP version is 2
IGMP query interval is 60 seconds
IGMP querier timeout is 120 seconds
IGMP max query response time is 10 seconds
IGMP querying router is 10.110.91.129
No IGMP group reported
4.1.4 display igmp port
Syntax
display igmp port port-number [ vlan vlan-id ]
View
Any view
Parameter
port port-number: Specifies IGMP port number.
vlan vlan-id: Specifies the native VLAN ID of the port.
Description
Using display igmp port command, you can view the configuration information about
the multicast on the port.
If no parameter is specified, this command displays the information of all the ports. The
IGMP configuration information of all the ports will be displayed.
For the related command, see igmp host-join, igmp group-policy.
To Next Page
Loading...
Need help?
General
