Command Manual - System Management
Quidway S3500 Series Ethernet Switches Chapter 4 System Maintenance Commands
Huawei Technologies Proprietary
4-33
This command only takes effect on the current terminal where the commands are input.
The debugging/log/trap information can be output to the current terminal, beginning in
user view. When the terminal monitor is shut down, no debugging/log/trap information
will be displayed in local terminal, which is equals to having performed undo terminal
debugging,undo terminal logging,undo terminal trapping commands. When the
terminal monitor is enabled, you can use terminal debugging / undo terminal
debugging, terminal logging / terminal logging and terminal trapping / undo
terminal trapping respectively to enable or disable the corresponding functions.
Example
# Disable the terminal monitor.
<Quidway> undo terminal monitor
4.5.19 terminal trapping
Syntax
terminal trapping
undo terminal trapping
View
User view
Parameter
None
Description
Using terminal trapping command, you can enable terminal trap information display.
Using undo terminal trapping command, you can disable this function.
By default, this function is enabled.
Example
# Enable trap information display.
<Quidway> terminal trapping
To Next Page
Loading...
Need help?
General
